Wednesday, 25.December 2019 20:59 printed this protected document! LH80_en.pdf ADMIN
Wednesday, 25.December 2019 20:59 printed this protected document! LH80_en.pdf ADMIN
Wednesday, 25.December 2019 20:59 printed this protected document! LH80_en.pdf ADMIN
Wednesday, 25.December 2019 20:59 printed this protected document! LH80_en.pdf ADMIN
1 Safety warnings, signs
Working with the machine represents a risk of serious or fatal injury, which you as
the owner, machine operator or a member of the maintenance personnel can
counteract. You can avoid dangers and accidents by reading the various safety
instructions attentively on a regular basis, and by following them at all times. This
applies in particular to personnel who only work on the machine occasionally, e.g.
for setup or maintenance work.
The safety instructions are listed below. If you comply with these instructions
conscientiously, you can be sure to safeguard your own safety and the safety of
other people, and you will avoid causing damage to the machine.
The descriptions of work in this publication describe the necessary safety
precautions which must be taken to prevent people and the machine from being
exposed to hazards.
1.1 Safety advices and symbols
1.1.1 Designation of safety advices
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow
this symbol to avoid possible injury or death.
Tab. 1
The safety alert symbol appears always together with one of the following signal
words:
DANGER
WARNING
CAUTION
DANGER
indicates a hazardous situation which, if not
avoided, will result in death or serious injury
WARNING
indicates a hazardous situation which, if not
avoided, could result in death or serious injury
CAUTION
indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury
NOTICE
indicates a hazardous situation which, if not
avoided, could result in property damages
Tab. 2
Designated use
Wednesday, 25.December 2019 20:59 printed