Rev. 2 - 07/09
ARCHITECTS' AND ENGINEERS'
The Programming Cable(s) shall be Alpha Communica-
tions®/S.T.R.™ QwikBUS™ EMPK-VFS/FS (open-voice
style) or EMPK-VH/HT (handset style) or approved
The EMPK-VFS/FS or EMPK-VH/HT shall be used in
conjunction with the associated QwikBUS™ station, to
allow a single person to quickly and easily program all of
the stations in a typical QwikBUS™ system.
One end of the EMPK-VFS/FS or EMPK-VH/HT shall
easily plug onto the QwikBUS™ power equipment unit,
and the other end to the polarized connector on each
associated QwikBUS™ station, while programming.
Contractor shall observe all local and national electrical
and building codes.
Copyright© 2008-2009, Alpha Communications®, All Rights Reserved
42 Central Drive • Farmingdale NY 11735-1202 • Phone (631) 777-5500 • Fax (631) 777-5599
TOLL-FREE 1-800-666-4800 • Web: www.AlphaCommunications.com • Email: firstname.lastname@example.org
The Alpha Communications®/S.T.R.™ EMPK-VFS/
FS and EMPK-VH/HT QwikBUS™ Programming
Cables are designed to be used in conjunction with
various QwikBUS™ intercom/emergency stations,
to make station programming much faster and easier
than competitor's systems, and to allow a single
person to program the stations.
The EMPK-VFS/FS is used with the FS1000, FS1500,
FSE1500 and VFS1000 series (open-voice style)
intercom and video-intercom stations.
The EMPK-VH/HT is used with the HT3033,
VH3033 and VHC3033 series (handset style) inter-
com and video-intercom stations.
Typically one end of the EMPK cable is connected
to the QwikBUS™ system power components and
the other end plugs into the associated QwikBUS™
• Allows for one-person station programming
• Easy plug-in (polarized) connectors
• Rugged and Reliable
Polarized plug-in connectors on both
ends of the cable to connect to the
QwikBUS™ power equipment and to
the QwikBUS™ station.