Channel Coding for the 5G wireless networks is facing novel challenges. Turbo and LDPC code doesn’t meet the requirements of 5G usage scenarios. Thus polar code are evolved. Different decoding approaches are used, such as SC, SCL at the receiver end of the digital communication system. Depending on the nature of the communication system appropriate decoding procedure is used. The performance of these decoding strategies is analysed by plotting BER v s SNR graphs. For this purpose MATLAB is used which gives better results and computations. Vijaykumar S | Vidyarani H J "MATLAB Implementation of Polar Codes for 5G Systems" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, URL: https://www.ijtsrd.com/papers/ijtsrd33344.pdf Paper Url: https://www.ijtsrd.com/engineering/computer-engineering/33344/matlab-implementation-of-polar-codes-for-5g-systems/vijaykumar-s
International Journal of Trend in Scientific Research and Development (IJTSRD)
Volume 4 Issue 6, September-October 2020 Available Online: www.ijtsrd.com e-ISSN: 2456 – 6470
@ IJTSRD | Unique Paper ID – IJTSRD33344 | Volume – 4 | Issue – 6 | September-October 2020
Page 314
MATLAB Implementation of Polar Codes for 5G Systems
Vijaykumar S1, Vidyarani H J2
1M. Tech, 2Asistent Professor, Department of ISE,
1,2Dr. Ambedkar Institute of Technology, Bengaluru, Karnataka, India
ABSTRACT
Channel Coding for the 5G wireless networks is facing novel challenges. Turbo
and LDPC code doesn’t meet the requirements of 5G usage scenarios. Thus
polar code are evolved. Different decoding approaches are used, such as SC,
SCL at the receiver end of the digital communication system. Depending on the
nature of the communication system appropriate decoding procedure is used.
The performance of these decoding strategies is analysed by plotting BER v/s
SNR graphs. For this purpose MATLAB is used which gives better results and
computations.
KEYWORDS: Polar code
How to cite this paper: Vijaykumar S |
Vidyarani H J "MATLAB Implementation
of Polar Codes for 5G
Systems" Published
in
International
Journal of Trend in
Scientific Research
and
Development
(ijtsrd), ISSN: 2456-
6470, Volume-4 |
Issue-6, October 2020, pp.314-318, URL:
www.ijtsrd.com/papers/ijtsrd33344.pdf
Copyright © 2020 by author(s) and
International Journal of Trend in Scientific
Research and Development Journal. This
is an Open Access article distributed
under the terms of
the
Creative
Commons Attribution
License
(CC
BY
4.0)
(http://creativecommons.org/licenses/by
/4.0)
1. INTRODUCTION
The wireless communication system is improving rapidly
nowadays. 1G or first generation was introduced in 1980s
and had a practical speed of 2.4 kbps, it provided mobile
telephony services. 2G or second generation provided digital
voice and short messaging and was introduced in 1990 with