WORKSHOP MANUAL
AGROTRON 210
AGROTRON 235
AGROTRON 265
SAME DEUTZ-FAHR DEUTSCHLAND GmbH
00-3
GENERAL SAFETY RULES
SAFETY NOTES
To ensure that machines entrusted to Authorised Service Centres for repair or overhaul continue
to function correctly, it is very important that all repair work is carried out in the prescribed manner.
The procedures for checks and repairs indicated in this manual are safe and effective.
Some of the operations described require the use of special tools and equipment: these tools
have been designed for a specific purpose and may ordered directly from the Manufacturers.
DO NOT USE MAKESHIFT TOOLS; not only is there is risk of personal injury, but such tools are
rarely suited to the purpose for which they are used.
To prevent injury to operators, the symbols
and
are used in this manual to indicate the
safety precautions required. The warnings accompanying these symbols must always be ad-
hered to carefully.
In potentially hazardous situations, always give priority to personal safety and take the necessary
actions to eliminate the danger.
GENERAL SAFETY RULES
1 - Even if you have a thorough knowledge of the machine as regards its com-
ponents, operation and controls, always take particular care when carrying
out the following operations. Remember that the machine you are working
on is in need of repair or overhaul and consequently may not always be-
have as expected.
2 - Before starting work, clean the machine thoroughly to remove all mud,
dust and road dirt.
Also clean the cab to remove all traces of oil, snow and ice from the access
steps and grab rails.
3 - When climbing up to or down from the cab, always ensure you maintain
three points of contact at a time (foot or handholds) in order to keep your
balance and prevent accidental falls.
4 - Always take special care when carrying out fault diagnosis operations;
these operations often require two persons, who must never stand in front
of the wheels when the engine is running.
5 - When carrying out checks and repairs, wear close-fitt