Section 1 — Chemical Product and Company Identification
Section 2 — Composition, Information on Ingredients
A Sodium-Lead alloy, 8.8% metallic Sodium (7440-23-5).
Section 3 — Hazards Identification
Call a physician, seek medical attention for further treatment, observation and support after first aid.
Inhalation: Remove to fresh air at once. If breathing has stopped give artificial respiration immediately.
Eye: Immediately flush with fresh water for 15 minutes.
External: Wash continuously with fresh water for 15 minutes.
Internal: Give large quantities of water. Call a physician or poison control at once.
Section 4 — First Aid Measures
Section 7 — Handling and Storage
Avoid contact with eyes, skin and clothing. Wear chemical splash goggles, chemical-resistant gloves and chemical-resistant apron.
Use ventilation to keep airborne concentrations below exposure limits. Always wear a NIOSH-approved respirator with proper
cartridges or a positive pressure, air-supplied respirator when handling this material in emergency situations (spill or fire).
Exposure guidelines: TWA 0.15 mg/m3 (Pd) (OSHA)
BB size shot or granules. Odorless.
Highly toxic by ingestion and inhalation (lead component). Irritating to body tissues.
Avoid all body tissue contact.
Sodium will react with water to produce hydrogen gas.
Section 5 — Fire Fighting Measures
dri-NA contains 8.8% sodium.
Fire Fighting Instructions: Use Class D, Met-L-X, or dry sand as a fire extinguisher. Avoid water
contact, violent reaction with water. Firefighters should wear PPE and SCBA with full facepiece
operating in positive mode.
Section 6 — Accidental Release Measures
Restrict unprotected personnel from area. Remove all ignition sources and water . Sweep up, place in sealed bag or container and
dispose. Ventilate area and wash spill site after material pickup is complete. See Sections 8 and 13 for further information.
Section 8 — Exposure Controls , Personal Protection
Flinn Suggested Chemical Storage Pattern: Inorganic #1. Store