The NHR-8A Bedside Call Cord for the
CommuniCare system provides call
annunciation from a patient station when the
button is pressed.
Used with either the NH-1SA single or NH-2SA
dual patient station, the bedside call cord
provides easy access for the user to place a
call for assistance.
Built with high impact protection, the button is
rated for a million uses, and the cord is designed
to withstand up to 25,000 volts of electrostatic
The cord length is 7 feet, equipped with a bed
clip for easy attachment to the sheet.
A call from the bedside call cord attached to a
patient station will activate a routine call to the
master station, and steadily illuminate the white
If the bedside call cord is pulled out of the patient
station’s jack, a fast pulsing tone and light will
be activated at the master station, and the white
lamp will flash. Reinsert the cord or a dummy
plug (NHR-DP) to cancel the call.
• Activates routine call at master station and
steady white corridor lamp
• High impact protection, designed for 1
• Withstands 25,000 volts of electrostatic
• 1/4” phone jack plugs into patient station
• 7’ cord with bed clip
NHX Nurse Center
www.leedan.com firstname.lastname@example.org Toll-Free: 800-231-1414
One (1) per NH-1SA
Two (2) per NH-2SA
1/4” ‘L’ phone jack
Plug into patient station
Textured PVC plastic over rigid ABS
fire-retardant plastic core
(H x W x D):
Handheld button: 3”
UL 1069 Listed
C-UL Canadian Standard C22.2
Product specification subject to change without notice.
Bedside call cord shall be Aiphone model NHR-8A,
equipped with 1/4” phone jack, security clip, and
momentary call button.
Call cord shall be textured PVC plastic double-
molded over rigid ABS fire-retardant plastic to