Page 1 of 2
MATERIAL SAFETY DATA SHEET
MAY BE USED TO COMPLY WITH OSHA'S HAZARD COMMUNICATION STANDARD, 29 CFR 1910.1200 AND
SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT (SARA) OF 1986 PUBLIC LAW 99-499.
STANDARD SHOULD BE CONSULTED FOR SPECIFIC REQUIREMENTS.
CO Industrial Products
3100 Morgan Road
SUPPLIERS NAME: N94 W14355 Garwin Mace Drive
Menomonee Falls, WI 53051 USA
ABRACOR ® Carbide with Kevlar® II - Hardener
PRODUCT CLASSIFICATION: Wear Resistant Composite
IMPORTANT: This section covers the materials from which these products are manufactured. The fumes and gases
produced during normal use of these products are covered in Section V. The term "Hazardous" in "Hazardous Ingredients"
should not only be interpreted as a term required and defined in OSHA Hazard Communication Standard (29 CFR Part
1910.1200), but also as defined by other regulatory agencies. The chemicals or compounds subject to reporting under Title
III, in Section 313, of the Superfund Amendments and Reauthorization Act (SARA) are marked by the symbol #.
1. Hazardous Ingredients:
Exposure limits are subject to change. Contact ACGIH, OSHA, NIOSH, and IARC for current values.
2. Physical Data:
Thick Gritty Paste
Solubility in Water:
3. Fire and Explosion Hazard Data: