8750 – 53 Ave NW, Edmonton AB, T6E 5G2
TEL: 780.468.4064 FAX: 780.469.1899
TOLL FREE: 800.661.2792
360, 800 – 6 Ave SW, Calgary AB, T2P 3G3
TEL: 403.265.4401 FAX: 403.269.5540
TOLL FREE: 800.661.1343
For MSDS see www.di-corp.com
PRODUCT DATA
CHEMUL-II
DESCRIPTION
Chemul-II can be used as both a primary and secondary oil mud emulsifier. Chemul II is a
sulfonated amido amine, blended with wetting agents. Can be used as a co-emulsifier with
Chemul-I or other similar primary emulsifiers.
PROPERTIES
Physical
Chemical
Appearance:
Specific Gravity:
Flash Point:
Amber liquid
.96 - .98
50 – 60oC (Setaflash CC)
Type:
Solubility:
pH:
Microtox:
Blend of sulfonated amido amine
derivatives
Dispersible (water)
6.0-8.0 (10% solution)
Not applicable
APPLICATION
Chemul-II forms a stable water-in-oil emulsion when it is added to oil and water mixtures with
proper agitation. Oil mud systems using Chemul-II are easily prepared using the proper amount of
oil, water, and electrolytes to form a tight emulsion. The standard system uses 4.0-10.0 L/m3 of
Chemul-II. High temperature or weighted systems use 6.0-16.0 L/m3 of Chemul-II often in
conjunction with Chemul-I as the supplemental primary emulsifier
1. Provides emulsion stability.
2. Not affected by electrolyte concentrations in water phase.
3. Compatible with other primary and supplemental emulsifiers.
4. Imparts high temperature stability.
5. May be used as an oil-wetting surfactant.
MIXING AND HANDLING
Employ rubber gloves, rubber apron, skin and eye protection and ensure mixing is done in an area
with adequate ventilation.
WHMIS: Controlled (see MSDS) TDG: Regulated (see MSDS) PACKAGING: 205 litre drum