CHC Series Corner-Mount
The Alpha Communications® CHC series Corner
Mount Camera Housings are designed to protect the
installed camera against vandalism or theft, while
providing an attractive and compact camera housing.
Three (3) standard finishes are available in Brushed
Stainless Steel (CHCSS), Polished Brass (CHCBR)
or painted White (CHCWH). Custom painted
finishes are also available (at extra cost).
Simply add you own mini camera, or order with a
built-in B&W camera (add suffix/BW) and you
have an attractive, high security camera/housing
unit, ideal for elevators, hallways, offices, lobbies,
Compare to some of our competitor's housings and
this is what you'll find... their housings use a small key
lock to protect the camera from theft. Inserting a
screwdriver and a quick snap, the lock gives way,
and the housing is open. Our housing requires that the
potential thief take the time to remove six (6) tamper
resistant screws, before the camera can be stolen!
Fully Adjustable Left/Right/Up/Down Camera
Polycarbonate Protective Camera Window
Six (6) Security Screws protect the camera
16 Gauge High-Carbon Stainless Steel (model#
Access holes from the Top and Rear
Can mount in Corner or to Ceiling
Custom Colors Available (at extra cost)
Available WITH or WITHOUT Built-in Camera
Inside of Housing is Painted Black (powder coat)
7.50"W (191mm) x 5.75"H (147mm) x
SHOWN FROM FRONT OF UNIT
Rev. 2 - 06/01
ARCHITECTS' AND ENGINEERS'
The compact corner camera housing(s) shall be Alpha Commu-
nications® CHC series or approved equal.
Housing(s) shall be made of Stainless Steel (CHCSS) or Pol-
ished Brass (CHCBR) or painted White (CHCWH). Stainless
Steel model shall be made of vandal-resistant 16 Gauge High-
Carbon Stainless Steel. Housing(s) shall provide access holes
from the top and rear, and shall protect the camera by means
of six (6) tamper-resistant screws to