Care & Safety
Body & Framework
2CX, 2DX, 210, 212
From M/c No. 657001 TO
PUBLISHED BY THE
TECHNICAL PUBLICATIONS DEPARTMENT
OF JCB SERVICE; WORLD PARTS CENTRE,
CHEADLE ROAD, UTTOXETER, ST14 7BS
Tel. ROCESTER (01889) 590312
PRINTED IN ENGLAND
Publication No. 9803/7110
This publication is designed for the benefit of JCB Distributor Service Engineers who are receiving, or have received, training
by JCB Technical Training Department.
These personnel should have a sound knowledge of workshop practice, safety procedures, and general techniques associated
with the maintenance and repair of hydraulic earthmoving equipment.
Renewal of oil seals, gaskets, etc., and any component showing obvious signs of wear or damage is expected as a matter of
course. It is expected that components will be cleaned and lubricated where appropriate, and that any opened hose or pipe
connections will be blanked to prevent excessive loss of hydraulic fluid and ingress of dirt. Finally, please remember above all
else SAFETY MUST COME FIRST!
The manual is compiled in sections, the first three are numbered and contain information as follows:
General Information - includes torque settings and service tools.
Care & Safety - includes warnings and cautions pertinent to aspects of workshop procedures etc.
Routine Maintenance - includes service schedules and recommended lubricants for all the
The remaining sections are alphabetically coded and deal with Dismantling, Overhaul etc. of specific components, for example:
Body & Framework
The page numbering in each alphabetically coded section is not continuous. This allows for the insertion of new items in later
issues of the manual.
Section contents, technical data, circuit descriptions, operation descriptions etc are insert