93217-00210
March 2012
SHOP MANUAL
WHEEL LOADER
135ZV-2
Disassembly & Reassembly
Service Standard
Powered by CUMMINS QST30-C ENGINE
Serial No. 13C1-9501~
Disassembly & Reassembly135ZV-2SHOP MANUAL93217-00210Service Standard
93217-00210
March 2012
Foreword
To ensure good machine performance, reduce failures or problems, and prolong the service life of each component,
it is necessary to operate the machine as is directed in the Operator and Maintenance Manual.
To effectively diagnose and repair the machine, it is important to follow the guidelines laid out in this Shop Manual.
Disassembly & Reassembly
Service Standard
For the engine, refer to the engine Shop Manual provided by the engine manufacturer.
The purpose of this manual is to provide information on the product and the correct maintenance and repair meth-
ods. Please read this manual to ensure correct troubleshooting and good repair service.
This manual will be periodically reviewed and revised for more satisfactory content. If you have any opinion or
requests, please inform us.
Safety precautions
The most important point in providing repair service is
safety. To ensure safety, observe the general cautions
described below.
- This manual is intended for properly trained and
equipped service technicians.
- Any work on the machine must be performed by the
trained personnel only.
- Carefully read this manual to thoroughly understand
the operation method before you operate or repair
the machine.
- Be sure to wear appropriate clothes and protectors,
such as safety boots, hard hat and goggles.
- Place the machine on level and solid ground, and
place chocks against the wheels to prevent move-
ment.
- Remove the cable from the battery before starting
the service work, and attach a "DO NOT OPERATE!"
tag to the operation board.
- Be sure to release the internal pressure before you
remove a pipe, such as the hydraulic oil, air, or
engine coolant pipe.
- Be sure to apply the articulatio