101 90 73-26
Workshop manual
Husqvarna Hedgetrimmers
325HS/ 325HE/ 325HDA
3
Workshop Manual
Hedge trimmers
1. Starter ___________________________________ 5
2. Ignition system ____________________________ 7
3. Fuel system _______________________________ 9
4. Centrifugal clutch _________________________ 13
5. Gear ____________________________________ 17
7. Crankshaft and crankcase__________________ 25
8. Exhaust system __________________________ 27
9. Cutting equipment ________________________ 31
© Copyright Husqvarna AB, Sweden 2000
This supplement only takes up elements specific
to the above mentioned models.
For complete information when servicing we rec-
ommend that the supplement is studied together
with the Workshop Manual.
(Order no. 101 90 74-26)
and the supplement for brushcutters, trimmers,
pruners and hedge trimmers.
(Order no. 101 90 75-26)
Supplement for models 325HS, 325HE,325HDA
Contents
5
1.
Starter
Contents
General ___________________________________ 6
Replacing the drive dogs, supplement ___________ 6
6
1
504 90 00-02
4 mm
Starter
WARNING!
Protective glasses should be worn when working on the starter to avoid injury to the
eyes if, for some reason, the return spring should fly out.
!
Replacing the drive
dogs, supplement.
Make sure the ear on the drive cup is
fitted in the cut-out on the crankshaft.
Replacing the drive
dogs, supplement
325HS75, 325HS99
Fit the balance weight in the drive cup,
if necessary.
Fit the drive cup on the crankshaft.
NOTE!
Risk for incorrect assembly. If the
weight is fitted on the wrong side of the
drive cup the blades will vibrate heavily
when the engine is running.
Deviations:
Starter handle placement. The drive
cup is fitted with a balance weight.
General
See Brushcutter 325.
The balance weight should be facing
the spark plug when the piston is in top
dead centre.
7
2.
Ignition system
Contents
General
8
Assembling the cylinder cover
8
8
2
504 90 00-02
4 mm
The spark in an electronic ignition system
has a very short burn time and can therefore
be interpreted as weak a