Service Repair Manual
Models
950H WHEEL LOADER
Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 950H WHEEL LOADER MXL
Configuration: 950H Wheel Loader MXL00001-UP (MACHINE) POWERED BY C7 Engine
Disassembly and Assembly
950H and 962H Wheel Loaders Power train
Media Number -UENR0789-00
Publication Date -01/10/2012
Date Updated -30/10/2012
i05018792
Transmission Planetary - Assemble
SMCS - 3160-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number
Part Description
Qty
A
138-7575
Link Bracket
2
C
136-1452
Retaining Ring Pliers
1
D
5P-5197
Retaining Ring Pliers
1
E
1P-1863
Retaining Ring Pliers
1
F
1P-0520
Driver Group
1
H
1P-0510
Driver Group
1
Note: Cleanliness is an important factor. Before assembly, clean all parts thoroughly in cleaning
fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be
deposited on the parts causing later trouble. Inspect all parts. If any parts are worn or damaged,
use new parts for replacement. During assembly, put clean transmission oil on all internal parts.
1/30
950H Wheel Loader MXL00001-UP (MACHINE) POWERED BY C7 Engine(SEBP5...
2020/4/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Illustration 1
g00340875
1. Raise the temperature of bearing (122) and install bearing (122) on input shaft (118), as
shown.
2. Apply clean transmission oil to seals (120) and to seal ring (121). Install seals (120) and seal
ring (121) on input shaft (118) .
Illustration 2
g00327703
3. Install dowels (119) in housing (117). The dowels must protrude from the housing by 10.5 ±
0.5 mm (0.41 ± 0.02 inch).
4. Carefully install input shaft (118) in housing (117) .
2/30
950H Wheel Loader MXL00001-UP (MACHINE) POWERED BY C7 Engine(SEBP5...
2020/4/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Illustration 3
g00325045
5. Install retaining ring (116) i