8 Series Mounting Accessories
BUILDING CODE SIGNS
(Plate not included)
• Flexible installation solutions • Unique armature options • Enhanced security options
• Quick installation accessories for experienced installers • Flexible adjustment options
In or Out…we make it Easy!™
POST BRACKET TOP JAMB “Z” BRACKET
ANGLE BRACKET FILLER BAR
GLASS DOOR BRACKET ARMATURE PLATE HOLDER
SPLIT ARMATURE PLATE DSS RETROFIT KIT
3/8” ARMATURE PLATES
MOUNTING PLATE SPACERS
3/8” armature plates are available for frames that cannot accommodate the
standard 5/8” plate. Also available in DSS version.
Required for narrow headjamb or center-hung single-acting doors, when
inadequate space is left for mounting. Ideal for narrow aluminum frames.
The armature plate holder is used when the door cannot accommodate
armature according to the standard mounting hardware procedures.
The holder mounts on the face of the door and the armature plate
is fastened to holder. Available for standard armature and DSS armatures.
Two code-related signs are offered.
“PUSH UNTIL ALARM SOUNDS. DOOR CAN BE OPENED WITHIN 15 SECONDS”
“EMERGENCY EXIT UNLOCKED BY FIRE ALARM”
Required by code on all openings where magnetic locks are used.
Spanner head tamperproof screw for wire cavity cover. Includes
special security driver. Special Order
Cover tamper switch signals the removal of the wire cavity cover.
Switch configuration: SPDT (NO/NC). Special Order
DSS RETROFIT KIT
If a door status sensor is desired after magnet has been installed, it can
easily be added on site. Includes a reed switch and a corrosion-free
ceramic magnet embedded i