How To Configure Brother MFC 7420 Setup?
Setting up a Brother printer is quite simple than you think. You can quickly set up the
Brother MFC-7420 printer by following the quick steps given below. This printer comes
with an ADF, and so you can load multiple documents for scanning or copying.
Unpack your printer first and then take out the printer supplies such as power
cord, software installation CD-ROM, user’s guide, and telephone line cord.
Open the front cover and take out the drum unit assembly from the printer.
Shake it gently four to five times to evenly distribute the toner inside the unit.
Refix the drum unit assembly into the printer and close the front cover.
Pull out the paper tray from the printer and load a stack of legal plain paper into
Adjust the loaded paper with paper width guides.
Refix the paper tray into the printer and connect the supplied power cord and
telephone line cord to the correct ports.
Connect the other end of the power cord to a wall outlet and turn on the printer
Set basic preferences such as date and time.
If you wish to add fax, set the station ID, and configure the fax settings.
Next, install the printer driver on your computer using the supplied software CD-
After completing the Brother MFC 7420 driver installation, verify the printer
You can download the Brother MFC 7420 printer’s driver by clicking the Driver
Download button available on this page. However, you can also download it from the
official Brother site. Make sure to identify your OS version before downloading the
printer driver from the official site because you need this detail to download a