®
Hilti (Canada) Corporation
MSDS No.:
265C
Revision No.: 001
Revision Date: 1/18/08
Page:
1 of 2
HILTI ® is a registered trademark of Hilti Corp.
MATERIAL SAFETY DATA SHEET
Product identifier:
CF 116-14 Grip Filler Foam
Product description / use:
Polyurethane foam
Supplier:
Hilti (Canada) Corporation, 6790 Century Avenue, Suite #300, Mississauga, Ontario L5N 2V8
Originator
Hilti, Inc., P. O. Box 21148, Tulsa, Oklahoma, USA 74121
Emergency phone number:
Chem-Trec: 1 800 424 9300
INGREDIENTS INFORMATION
Ingredient
CAS Number % (wt.)
LC50, (rat)
LD50 (rat)
TLV
STEL
Tris(1-chloro-2-propyl) phosphate
13674-84-5
10 – 30
N/Av
1500 mg/kg
N/E
N/E
4,4’-Diphenylmethane diisocyanate (MDI)
101-68-8
10 – 30
178 mg/ m3
9200 gm/kg
0.051 mg/ m3 N/E
Propane
74-98-6
01 – 05
N/Av
N/Av
1000 ppm
N/E
Butane
106-97-8
01 – 05
658 gm/m3/4H N/Av
1000 ppm
N/E
Dimethyl ether
115-10-6
03 – 07
30,800 mg/m3 N/Av
N/E
N/E
1,1-Difluoroethane
75-37-6
05 – 10
977 gm/m3/2H
(mouse)
N/Av
N/E
N/E
PHYSICAL PROPERTIES
Appearance / Physical state:
Yellowish liquid/foam
Odour:
Sweet odor.
Specific gravity (at 20ºC):
0.9-6.0
VOC Content:
Not determined.
Vapour pressure (at 20ºC):
5.5-6 bar
Vapour density:
Not determined.
Evaporation rate:
Not determined.
Boiling point:
Not determined.
Freezing point:
Not determined.
pH:
Not determined.
Coefficient of H20 / oil distrib:
Not determined.
Solubility in water:
Not soluble.
FIRE AND EXPLOSION DATA
Flash point / Method:
Flammable gas
Flammable limits:
0.4 – 32%
Conditions of flammability:
Extremely flammable aerosol. Contents under pressure. Cans exposed to fire or direct heat
can rupture from pressure build-up and be propelled through the air.
Auto-ignition temperature:
Not determined.
Means of extinction:
CO2, Dry Chemical, Foam, Water.
Special fire fighting
procedures:
None known for cured foam. Uncured isocyanates react with water to release CO2.
Hazardous combustion
pr