Service Repair Manual
Model
416D BACKHOE LOADER
Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 416D BACKHOE LOADER CXP
Configuration: 416D Backhoe Loader CXP00940-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Engine
Supplement
Media Number -RENR3573-02
Publication Date -01/09/2009
Date Updated -30/09/2009
i01437317
Engine and Transmission - Remove
SMCS - 1000-011; 1004-011; 3030-011; 3101-011
Removal Procedure
Start By:
A. Remove the refrigerant condenser. Refer to Disassembly and Assembly, RENR3573,
"Refrigerant Condenser - Remove and Install".
B. Remove the hydraulic oil cooler. Refer to Disassembly and Assembly, RENR3573,
"Hydraulic Oil Cooler - Remove and Install".
C. Remove the radiator. Refer to Disassembly and Assembly, RENR3573, "Radiator - Remove
and Install".
D. Remove the fan guard. Refer to Disassembly and Assembly, RENR3573, "Fan Guard -
Remove and Install".
E. Remove the muffler. Refer to Disassembly and Assembly, RENR3573, "Muffler - Remove
and Install".
F. Remove the air filter housing. Refer to Disassembly and Assembly, RENR3573, "Air Filter
- Remove and Install".
G. Remove the front drive shaft. Refer to Disassembly and Assembly, RENR3578, "Drive
Shaft (Front) - Remove and Install".
H. Remove the rear drive shaft. Refer to Disassembly and Assembly, RENR3578, "Drive Shaft
(Rear) - Remove and Install".
I. Remove the Front floorplate. Refer to Disassembly and Assembly, RENR3585, "Floorplate
- Remove and Install".
Table 1
Required Tools
Tool
Part Number
Part Description
Qty
A
138-7573
Link Bracket
4
B
6V-3145
Load Leveler
1
1/18(W)
w
2019/9/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released befor