Rev.4 - 04/05
ARCHITECTS' AND ENGINEERS'
The adaptor plate(s) shall be Alpha Communica-
tions® Model AP001 (or AP001B) or approved
equal and shall be large enough to cover the area
occupied by the previous intercom unit. The adaptor
plate shall be made of 22 gauge cold-rolled steel,
painted in a White epoxy coat paint finish. The adaptor
plate(s) shall be punched to cover the existing back
box, and for the apartment intercom (or video-
intercom) station to be mounted onto the adaptor
plate(s). If required, contractor shall paint the adaptor
plate(s) to match the existing wall finish.
Copyright© 1996-2005, Alpha Communications®, All Rights Reserved
42 Central Drive • Farmingdale NY 11735-1202 • Phone (631) 777-5500 • Fax (631) 777-5599
TOLL-FREE 1-800-666-4800 • Web: www.AlphaCommunications.com • Email: email@example.com
AP001 and AP001B
The Alpha Communications® AP001 and AP001B adaptor plates
are designed specifically to cover existing oversized apartment
intercom back boxes and other existing wall openings.
Once the adaptor plate is affixed to the wall, you can install your
open-voice or handset apartment intercom station or surface
mount video-intercom station directly onto the adaptor plate.
We will gladly punch up to four (4) mounting holes (at no additional
cost), to enable you to easily mount the plate over the existing back
box. Simply provide us with a clear sketch showing the mounting
holes you need. If you choose, mounting holes can be easily drilled
right on the job-site. The model AP001 features a large (center) hole
for wire access and six (6) pre-punched holes for mounting common
apt. intercom stations and handsets.
Installation is quick, easy, attractive and eliminates the need for
plastering and painting over the existing hole.
Model AP001B is the same as the AP001, except there are no
mounting holes on the front of the faceplate. This enables you to
punch or drill any special h