Service Repair Manual
C9 Industrial Engine
Product: INDUSTRIAL ENGINE
Model: C9 INDUSTRIAL ENGINE JLW
Configuration: C9 Industrial Engine JLW00001-UP
Disassembly and Assembly
C9 Industrial Engines
Media Number -RENR7460-07
Publication Date -01/07/2014
Date Updated -15/11/2017
Engine Oil Filter Base and Oil Cooler - Remove
SMCS - 1306-011; 1378-012
Tool Part Number
Strap Wrench Assembly
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Dispose of all fluids according to local regulations and mandates.
1. Drain the coolant from the cooling system into a suitable container for storage or for
disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
2. Use Tooling (A) to remove engine oil filter (1).
3. Disconnect hose assembly (2). Remove bolts (4). Remove engine oil filter base (3) and the
4. Remove engine oil cooler (5) and the gasket.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Jun 3 17: