TECHNICAL DATA SHEET
Blueskin® SA
Self-Adhesive Air/Vapor Barrier Membrane
Physical Properties
-Color
-Thickness
-Application Temp
-Service Temp
-Elongation
(ASTM D412-modified)
-Tensile Strength
(Membrane)
(ASTM D412- modified)
-Tensile Strength (Film)
(ASTM D882)
-Minimum Puncture
Resistance – Membrane
(ASTM E154)
-Watertightness
(CAN/CGSB-37.58-M86)
Blue
40 mils (1.0 mm)
41ºF minimum
Minus 40°F to 158°F
200% minimum
500 psi minimum
5000 psi minimum
40 lbf.
Pass
-Low Temperature
Flexibility @ -30°C
(CGSB 37-GP-56M)
-Water Vapor Transmission
(ASTM E96)
-Lap Peel Strength @ 39°F
(ASTM D903 180° bend)
-Moisture absorption
(ASTM D570-81)
-Air Leakage @ 75 Pa
(ASTM E283-91)
-Air Leakage After 3000 Pa
Test (ASTM E330-90)
Pass
0.03 perms
1.6 ng/Pa.s.m2
10 lbf/in width
0.1%
0.0001 CFM/ft2
No change
Packaging
-Thickness
-Roll length
-Roll width
-Top Surface
-Bottom Surface
40 mils (1.0 mm)
75 ft.
36”, 18”, 12”, 9”, 6”, 4”
Blue Polyethylene
Siliconized Release Film
-Gross Coverage
36”
18”
-Net Coverage*
36”
18”
*Based on 2” side and end
laps.
225 ft2
112.5 ft2
212 ft2
100 ft2
Description
Blueskin® SA is a self-adhering membrane consisting of an SBS rubberized asphalt compound, which is integrally laminated to a blue
polyethylene film. The membrane is specifically designed to be self-adhered to a prepared substrate, providing an air/vapor/water
barrier.
Features
-SBS modified membrane, flexible at low temperatures.
-Impermeable to air, moisture vapor and water.
-No flame required.
-Thickness controlled at point of manufacture.
-Excellent adhesion to prepared substrates of concrete, concrete block, primed steel, aluminum mill finish, anodized aluminum,
galvanized metal, gypsum board and plywood.
-Excellent compatibility with most Henry adhesives and liquid air barrier membranes.
-Membrane is self-sealing when penetrated with se