10 Columbus Blvd.
Hartford, CT 06106 USA
SAFETY DATA SHEET
according to EC Directive 2001/58/EC
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
Identification of the preparation ULTRA BOND SUPER GLUE GEL 2G EU EN/FI/SV
2. COMPOSITION/INFORMATION ON INGREDIENTS
0.2 ppm TWA ACGIH
SILICA, AMORPHOUS TREATED
10 mg/m3 (inhal); 3 mg/m3
POLY (METHYL METHACRYLATE)
Xn;R22, Xi;R41, R43,
2 mg/m3 TWA ACGIH
3. HAZARDS IDENTIFICATION
Xi - Irritant
Most Important Hazards:
Moderately irritating to the eyes. May cause irritation of respiratory tract. May cause allergic respiratory
4. FIRST-AID MEASURES
If you feel unwell, seek medical advice (show the label where possible)
Move to fresh air in case of accidental inhalation of vapors. Oxygen or artificial respiration if needed.
Obtain medical attention.
Remove excess adhesive. Soak in warm, soapy water. The adhesive will come loose from the skin in
several hours. Cured adhesive does not present a health hazard even when bonded to the skin. For
skin adhesion, first immerse the bonded surfaces in warm, soapy water. Peel or roll the surfaces apart
with the aid of a blunt edge, e.g., spatula or teaspoon handle; then remove adhesive from the skin with
soap and water. Do not try to pull surfaces apart with a direct opposing action. Cyanoacrylates give off
heat on solidification. In rare cases, a large drop will increase in temperature enough to cause a burn.
Burns should be treated normally after the lump of