Service Repair Manual
385C and 385C L Excavator
Model: 385C L EXCAVATOR KGB
Configuration: 385C & 385C L Excavator KGB00001-UP (MACHINE) POWERED BY C18 Engine
Disassembly and Assembly
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -RENR8620-05
Publication Date -01/02/2012
Date Updated -20/02/2012
Travel Motor - Disassemble
SMCS - 4351-015
Tool Part Number
Slide Hammer Puller Gp
Threaded Rod M20 - 2.5
a. Remove the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Remove".
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
385C & 385C L Excavator KGB00001-UP (MACHINE) POWERED BY C18 Engine(...
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Dispose of all fluids according to local regulations and mandates.
Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior
of the components should be thoroughly cleaned. This will help to prevent dirt from entering the
internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform
disassembly procedures on a clean work surface. Keep components covered and protected at all
1. Place an alignment mark across all housings of the travel motor for assembly purposes.