Assembling the Top Craft
Wall hangers are easy to create. The minute size quilts once created will make a nice gift and/or
decoration for your home.
Once you have your parts together, as well as have your tools you can get started making a wall hanger.
If you are new to quilting, do not worry since the hanger we are making is one of the easier groups of
craft to create.
Do not forget to get your rotary cutters on hand, since throughout your quilting project you will need to
cut ¼‐inch allowances for your seams. Now, assuming you have your green, tan, blue, yellow, and peach
print in order we can get started making your top section of the quilt.
Briefly, I will go over the sections to help you prepare. You should have two, 2 ½ x 19 ½ inches of upper
and lower borders in the green prints. You should have another two borders in green at the size of 2 ½ x
27 ½ inches. You should have the value of 36 for your D Square and the size at 1 ½ x 1 ½ inches. Tan
print has six parts, i.e. A‐strip, B piece, C‐Strip, D‐E square, and F‐strip. Blue only has one part, while
yellow has three and peach has one. The yellow is C‐strip, D‐square, and the last value of four is the
cornerstone. C values eighteen, and measures at 1 ½ x 1 ½ inches, while D values 12 and measures at 2
½ x 2 ½ inches; F is the peach strip, Peach, which values four and its gauge is 1 ½ x 3 ½ inches. Peach has
the G‐strip, which values four and measures at 2 ½ x 5 ½ inches. The rust prints include the value of six,
which makes up the sashing #1 vertical at measures to 1 ½ x 13 ½ inches. The second sashing creates
three and measures to 1 ½ x 21 ½ inches, while the last H strip values four and measures at 1 ½ x 7 ½
You will need to cut these pieces of your quilt out. Use the guide above to achieve a precise cut. Now
you can crown your quilt. Start by creating a row and a block. Use your block, row, and begin stitching
your D‐Blue Square to attach to the A‐Tan narrow pieces. (Strips)