ARCHITECTS' AND ENGINEERS'
The power supply unit(s) shall be Alpha Communi-
cations®/Golmar model FA-PLUS/C, or approved
equal. The FA-PLUS/C shall be built into a rugged
high impact ABS plastic case, and shall be powered
by a standard 110VAC electrical outlet. Contractor
shall furnish the proper number of FA-PLUS/C
units, depending upon system capacity.
Low voltage wiring shall be used and positive screw
terminal connectors shall be provided for installation
wiring. The FA-PLUS/C shall be mountable right to
the surface of the wall or in a customer-supplied
junction box cabinet.
Contractor shall observe all local and national elec-
trical and building codes.
Copyright© 2010, Alpha Communications®, All Rights Reserved
42 Central Drive • Farmingdale NY 11735-1202 • Phone (631) 777-5500 • Fax (631) 777-5599
TOLL-FREE 1-800-666-4800 • Web: www.AlphaCommunications.com • Email: email@example.com
Power Supply Unit
The Alpha Communications®/Golmar FA-
PLUS/C power supply unit is used only with
the Platea and/or Szena series intercom and/
or video-intercom systems. The FA-PLUS/C
provides the intelligent circuitry needed to
control the video-intercom system functions.
Each FA-PLUS/C gets its power from a stan-
dard 110VAC plug-in electrical connection.
All FA-PLUS/C field connections are posi-
tive screw terminal type, or plug-in type.
Each Platea and/or Szena series system re-
quires a minimum of one FA-PLUS/C power
• Easily Installs Right on Finished Wall Surface or in
Optional Junction Box
• Operates on Safe Low-Voltage Class II Wiring
• Positive Screw Terminal Connectors
Height: 3.55" (91mm)
Width: 4.22" (108mm)
2.45" (63mm) from mounting
Construction: High impact Grey ABS plastic case
Positive screw terminal connectors
Surface-mounted (usually installed near
the system amplifier/power supply and
other system central equipment).
Power Supply Unit