Student Notes:
V5 Surfaces
Copyright DASSAULT SYSTEMES
Copyright DASSAULT SYSTEMES
Exercise
Exercise Presentation : Mobile Phone
60 min.
In this exercise you will complete a telephone part by
creating the place for its screen.
You will create the supporting Wireframe and build
the base surfaces.
Then you will split, trim, fillet and join the surfaces.
You will then perform a Draft analysis on the
surfaces to determine if the telephone can be
extracted from a mold.
You will modify the supporting sketch and will see
the automatic propagation of this change through
the final Skin.
Finally, you will see how to work in a Hybrid
environment by creating a Solid by offsetting the
Skin.
Student Notes:
V5 Surfaces
Copyright DASSAULT SYSTEMES
Copyright DASSAULT SYSTEMES
Design Intent : Mobile Phone
Adaptive sweep
and 0.2mm
fillets.
Edge fillet with blend
corner option
(radius=1mm)
0.1 mm. Thickness
Sewed surface
3mm fillet
Edge fillet with blend
corner option
(radius=1mm)
Student Notes:
V5 Surfaces
Copyright DASSAULT SYSTEMES
Copyright DASSAULT SYSTEMES
Creating the
Surfaces
Analyzing and
modifying the part
Performing operations :
Symmetry, trim, fillet,
join
Create a solid from
the surface.
4
3
2
5
Generating the
Wireframe
1
Mobile Phone : Design Process
Student Notes:
V5 Surfaces
Copyright DASSAULT SYSTEMES
Copyright DASSAULT SYSTEMES
Mobile Phone
Step 1 - Creating the Wireframe Elements
10 min
In this step you will create :
Parallel curves on a support
Extracted curves
Connect Curves
Corners
Circles
Projected curves
Student Notes:
V5 Surfaces
Copyright DASSAULT SYSTEMES
Copyright DASSAULT SYSTEMES
Do It Yourself…(1/4)
You have created the basic elements to complete the wireframe geometry.
Now you can hide the blue datum surface.
Part used: CATGSD_F_Phone_Step1_start.CATPart
Extract these edges from the original surface :
Extract this face from the blue surface :
Student Notes:
V5 Surfaces
Copyright DASSA