Get our full of quick settings to complete your Brother MFC 9970cdw setup. And also, configure your driver & wireless settings. Continue for more unboxing steps. Read more /printerdriver.us/brother/brother-mfc-9970cdw
How To Configure Brother MFC 9970CDW Setup?
Brother MFC 9970 CDW is a laser printer that can print and copy at 30ppm. It is an All-
in-One printer that supports Wireless, Ethernet, and USB interfaces. It has auto duplex
print/copy/scan/fax functions. The printer has a 5" color touch panel display up to 2400
x 600 dpi resolution. If you have just bought your printer and don't know how to
get Brother MFC 9970cdw setup, see the steps below.
Step 1: Unpacking the printer
First, remove the packing materials outside the carton box, and then take out the
Choose a location to place the printer. Ensure sure that the place you choose
must be away from the direct sunlight.
The printer components included in the printer package consist of the following.
Drum Units, Belt Unit, Starter Toner Cartridges, and Waste Toner Box that are
AC Power Cord
Telephone Line Cord
Safety and Legal Booklet
Basic User's guide
Quick Setup Guide
Lower the MP tray and take out the plastic sheet. Close the tray.
Now, press the Release button on the front cover, and remove the silica gel pack.
By holding the handle of the drum unit, pull it out.
Remove the orange packing material and also dispose of the dispose tapes.
Also, remove the four orange packing pieces.
Push the drum unit into the printer and close the front cover ober the Brother
MFC 9970cdw setup.
Step 2: Loading paper
Pull out the input paper tray from the printer.
Now, release the lever in the tray by pressing the green paper guide.
Fan a stack of paper that you are going to load into the tray.
Make sure to align the paper stack on a flat surface.
Adjust the paper guides in the tray according to the size of the paper you are
going to load inside the tray.
Insert the stack of paper into the input paper tray.
Place the print side facing down into the printer and ensure that the loaded paper
is only below the maximum paper mark. Close the tray.
Step 3: Connecting p