Thank you for purchasing this L.L. Bean Home Adirondack Footstool. Assembly
of this product requires a 7/16” wrench or an adjustable wrench. We have included
an Allen wrench to assist in the assembly.
Read through these instructions
thoroughly before beginning assembly.
We have found this to be of great value
when first assembling this product.
Remove all parts and hardware from
packing material. Wooden pieces should
be placed on a non- abrasive surface (like
the carton or carpet) to prevent damage to
Identify all parts using diagram at right
Identify and count hardware using
diagram at right.
Assembly of this product requires a 7/16”
wrench or an adjustable wrench. We
have included an Allen wrench to assist in
Align the holes in the legs with the holes
in the footrest. Ensure that the pointed
end of the legs is up and that the legs are
on the inside of the footrest. Insert the
carriage bolts through the footrest and the
legs. Then put the washers on the bolts
and tighten the nuts securely before use.
The footrest gets positioned with the
highest point against the chair.
Your painted footrest is finished with an
acrylic paint that is mildew and stain
resistant. To clean, wipe accumulated dirt
with a solution of warm soapy water and a
soft cloth; rinse thoroughly with clean
water. Your natural oak chair is finished
with a marine grade lacquer. It can be
cared for in the same manner as a painted
Product Support 1 800 341 4341