MATERIAL SAFETY DATA SHEET - CRITERION CORRECTING SOLUTION
Manufacturer: TASKEM, Inc.
4639 Van Epps Road
Brooklyn Heights, Ohio 44131
Latest Revision Date for MSDS Information:
October 7, 2005
Information on this product is on file with CHEMTREC. FOR EMERGENCY ASSISTANCE CALL 1-800-424-9300. If water pollution
occurs, notify appropriate authorities.
SECTION I - PRODUCT IDENTIFICATION
CRITERION CORRECTING SOLUTION
Product Identification Number:
General or Generic Id:
Nickel Plating Bath Additive
SECTION II - HAZARDOUS INGREDIENTS
This product does not contain material(s) listed as toxic chemicals as defined by the requirements of the Superfund Amendments and
Reauthorization Act of 1986 (SARA) Title III - Section 313, nor does it contain material(s) which are listed as hazardous chemicals as
defined by OSHA’s Hazard Communication Standard (29 CFR 1910.1200).
SECTION III - PHYSICAL DATA
Heavier than Air
Solubility in Water:
Appearance and Odor: Very Light Yellow, Odorless Liquid.
1.018 - 1.034
Slower than Ether
SECTION IV - FIRE AND EXPLOSION HAZARDS
Flammability Classification (DOT): Not Flammable
Does Not Apply
Foam, CO2 , Dry Chemical, Water Fog
Special Fire Fighting Procedures:
Positive pressure, self-contained respiratory protection and protective clothing should be worn by
firefighters in areas where product is stored.
Unusual Fire & Explosion Hazards: None.
SECTION V - HEALTH HAZARD DATA
Effects of Overexposure:
Mild irritant. Prolonged or repeated contact may cause redness and irritation.
Mild irritant. Prolonged or repeated contact may cause irritation.