Rev. 2 - 12/03
ARCHITECTS' AND ENGINEERS'
The key keeper(s) shall be Alpha Communications® model
KKF or approved equal, and shall be constructed of 12 gauge
cold rolled steel, with all welded construction. The key
keeper(s) shall be loose key type, and any retractor reels or
postal push-buttons shall be field installed by the contrac-
tor. The key keeper(s) shall be fully flush mounted to the
finished wall surface, and shall not protrude past the wall
surface. If required, the contractor shall paint the key
keeper(s) to match the building's decor (or as specified by
the architect). The key keeper door hinge shall be fully
concealed and fully welded to minimize vandalism and
unauthorized opening. Contractor shall install the key
keeper(s) as per all U.S. Postal Service regulations. Key
keeper(s) shall include four (4) postal lock mounting screws
and nuts required.
Copyright© 1994-2003, Alpha Communications®, All Rights Reserved
42 Central Drive • Farmingdale NY 11735-1202 • Phone (631) 777-5500 • Fax (631) 777-5599
TOLL-FREE 1-800-666-4800 • Web: www.AlphaCommunications.com • Email: firstname.lastname@example.org
KKF Key Keeper
Flush Mount Key Keeper
The Alpha Communications® KKF flush mount key keeper is
designed specifically to minimize vandalism and abuse. Manu-
factured entirely from 12 gauge cold rolled steel, and all welded
construction, these key keepers are built to last.
The KKF is designed to meet the requirements of the U.S. Postal
Service in New York and other major cities, calling for a vandal-
resistant all-steel keeper that is completely flush mounted, and
does not protrude from the surface of the wall.
The KKF hinges open on a completely concealed and welded
hinge assembly, and includes four (4) mounting screws posts
(and nuts) for the installation of the postal lock (supplied by the
local post office).
The KKF can be mounted vertically or horizontally, as req