714 & 718
PUBLISHED BY THE TECHNICAL
PUBLICATIONS DEPARTMENT OF:
World Parts Centre
Tel: 01889 590312
Publication No. 9803/7160 Issue 3
Care & Safety
Body & Framework
This publication is designed for the benefit of JCB Distributor Service Engineers who are receiving, or have received training by
the JCB Training Department.
These personnel should have a sound knowledge of workshop practice, safety procedures and general techniques associated
with the maintenance and repair of hydraulic earth moving equipment.
Renewal of oil seals, gaskets etc. and any component showing obvious wear or damage is expected as a matter of course. It is
expected that components will be thoroughly cleaned and lubricated where appropriate, and that any opened hose or pipe con-
nections will be blanked to prevent entry of dirt and excessive loss of hydraulic fluid. Finally, please remember above all else
SAFETY MUST COME FIRST!
the manual is divided into sections, the first three are numbered and contain information as follows:
= General Information - includes torque settings and service tools.
Care & Safety - includes warnings and cautions pertinent to aspects of workshop procedures etc.
Routine Maintenance - includes service schedules and recommended lubricants for all the machine.
The remaining sections are alphabetically coded and deal with Dismantling, Overhaul etc. of specific components, for example:
Body & Framework....etc.
The page numbering in each alphabetically coded section is not continuous. This allows for the insertion of new items in later
issues of the manual.
Section Contents, technical data, circuit descriptions, operational descriptions etc. are inserted at the beginning of each
alphabetically coded section.
All sections are listed on