Service Repair Manual
Models
C27 Locomotive Engine
Shutdown SIS
Previous Screen
Product: INDUSTRIAL ENGINE
Model: C27 INDUSTRIAL ENGINE WJC
Configuration: C27 Locomotive Engine WJC00001-UP
Disassembly and Assembly
C27 and C32 Engines
Media Number -M0074364-00
Publication Date -01/08/2015
Date Updated -13/09/2016
i02986920
Crankshaft Front Seal - Install
SMCS - 1160-012
Installation Procedure
Table 1
Required Tools
Tool Part Number
Part Description Qty
E
5P-1733
Seal Locator
1
5P-1737
Bolt
3
9S-8858
Nut (Seal Installer)
1
6V-6142
Seal Installer
1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Clean the outside diameter of the crankshaft.
1/3(W)
w
2020/6/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
Illustration 1
g01513455
2. Use Tooling (E) to install crankshaft front seal (4) and crankshaft wear sleeve (3) as a unit.
Note: Install the crankshaft front seal with the arrow that shows the direction of crankshaft
rotation toward the front of the engine.
2/3(W)
w
2020/6/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
Illustration 2
g01098057
3. Install adapter (2) and bolts (1).
End By:
a. Install the crankshaft vibration damper and pulley. Refer to Disassembly and Assembly,
"Vibration Damper and Pulley - Remove and Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Jun 19 09:48:53 UTC+0800 2020
3/3(W)
w
2020/6/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
Shutdown SIS
Previous Screen
Product: INDUSTRIAL ENGINE
Model: C27 INDUSTRIAL ENGINE WJC
Configuration: C27 Locomotive Engine WJC00001-UP
Disassembly and Assembly
C27 and C32 Engines
Media Number -M0074364-00
Publication Date -01/08/2015
Date Updated -13/09/2016
i05933887
Gear Group (Front) - Remove
SMCS - 1206-011
Removal Procedure
Table 1
Required Tools
Tool Part Number