Page 1 of 4
Material Safety Data Sheet
Date of Preparation:
May 6, 2009
May 6, 2009
Section 1 – Chemical Product and Company Identification
Product / Chemical Name: ALDOCOAT 394
Aldo Products Company, Inc.
1604 N Main Street
Kannapolis, NC 28081
Emergency Telephone Number:
Section 2 – Composition / Information on Ingredients
31 ± 2%
OSHA PEL: 0.1 mg/m3 (as respirable dust only)
ACGHI PEL: 0.1 mg/m3 (as respirable dust only)
2.0 at 20°C
less than 17%
100 ppm TWA (OSHA)
100 ppm TWA (ACGIH)
Note: All other chemicals in this product are Trade Secrets and are not regulated as hazardous by
any state Right-to-Know law.
Section 3 – Hazards Identification
Effects of overexposure:
Nasal and respiratory irritation, dizziness, fatigue, unconsciousness,
Can cause gastrointestinal disorders.
Possible irritation, dermatitis and defatting
MEDICAL CONDITIONS PRONE TO AGGRAVATION BY EXPOSURE: Not Known.
PRIMARY ROUTE(S) OF ENTRY: Dermal, Inhalation or ingestion.
ALDOCOAT 394 Material Safety Data Sheet
Page 2 of 4
Section 4 – First Aid Measures
Move subject to fresh air. If breathing stopped, administer respiration or
oxygen, call a physician.
Flush eyes with water for 15 minutes. Consult a physician if irritation persists.
Remove contaminated clothing, wash affected area with large amounts of
soap and water.
Do not induce vomiting. Consult a physician.
Section 5 – Fire-Fighting Measures
Method Used: TCC
Flammable Limits in Air Volume (Lower): 1.1
Flammable Limits in Air Volume