Canadian Workplace Hazardous Materials Information System
Material Safety Data Sheet
I. PRODUCT IDENTIFICATION
Product Name:
84117 PC PERMA POXY 30 MIN CRYSTAL CLEAR EPOXY 25ML PART 1
Item No:
202002H
Product Type:
Epoxy resin
II. COMPOSITION/INFORMATION ON INGREDIENTS
Component
Weight%
LD50/oral/rat
LC50/inhalation/rat
ACGIH TLV: TWA
BISPHENOL A/EPICHLOROHYDRIN
BASED EPOXY RESIN
25068-38-6
>60
11400 mg/kg
not available
not listed
III. PHYSICAL DATA
Physical State/Appearance:
Clear liquid
Odour & Odour Threshold:
Slight odour
Specific Gravity:
1.17
Evaporation Rate:
<1 (butyl acetate = 1)
Vapour Pressure:
<0.1 mm Hg
Vapour Density:
>1 (air =1)
Freezing Point:
Not determined
pH:
Does not apply
Octanol/Water Coefficient:
Not determined
Boiling Point:
>260 degrees C.
IV. FIRE AND EXPLOSIVE DATA
Recommended Extinguishing Media: Carbon Dioxide, Dry Chemicals, Foam.
Hazardous Combustion Products:
Carbon monoxide, aldehydes, acids and other organic substances may be formed during combustion or
elevated temperatures (260 degrees C.)
Sensitivity to Static Discharge:
Sensitivity to static discharge is not expected
Conditions of Flammability:
Heating above 150C in the presence of air may cause slow oxidative decomposition and above 260C may
cause polymerization.
Flash Point/Range:
>200°C PMCC
Autoignition Temperature:
Not determined
Upper Explosive Limit:
Not determined
Lower Explosive Limit:
Not determined
V. REACTIVITY DATA
Conditions Causing Chemical Instability:
Stable under normal conditions of use
Materials to avoid:
Incompatible with strong bases and oxidizing agents, Acids
Conditions of Reactivity:
Avoid excessive heat, sparks and open flame
Hazardous Decomposition Products:
Carbon dioxide, Carbon monoxide, Aldehydes, Organic acid vapors
VI. HAZARDS IDENTIFICATION
Primary Routes of Exposure:
Eye and skin contact, ingestion, inhalation
Existing Conditions Aggravated by
Exposure:
Preexisting eye, skin and respiratory disorders
Toxicity Information: (See Effects of Acu