Visit us at: www.adams.com
Basic ADAMS Full
U.S. Government Restricted Rights: If the Software and Documentation are provided in connection with a
government contract, then they are provided with RESTRICTED RIGHTS. Use, duplication or disclosure is
subject to restrictions stated in paragraph (c)(1)(ii) of the Rights in Technical Data and Computer Software
clause at 252.227-7013. Mechanical Dynamics, Incorporated, 2300 Traverwood Drive, Ann Arbor, Michigan
The information in this document is furnished for informational use only, may be revised from time to time,
and should not be construed as a commitment by Mechanical Dynamics, Incorporated. Mechanical
Dynamics, Incorporated, assumes no responsibility or liability for any errors or inaccuracies that may
appear in this document.
This document contains proprietary and copyrighted information. Mechanical Dynamics, Incorporated
permits licensees of ADAMS® software products to print out or copy this document or portions thereof
solely for internal use in connection with the licensed software. No part of this document may be copied for
any other purpose or distributed or translated into any other language without the prior written permission of
Mechanical Dynamics, Incorporated.
©2001 by Mechanical Dynamics, Incorporated. All rights reserved. Printed in the United States of America.
ADAMS ® is a registered United States trademark of Mechanical Dynamics, Incorporated.
All other product names are trademarks of their respective companies.
Welcome to Basic ADAMS Training 9
About Mechanical Dynamics 10
Content of Course 11
Getting Help at Your Job Site 12
Stamping Mechanism 13
Virtual Prototyping Process 14
Workshop 1—Stamping Mechanism 15
ADAMS/View Interface Overview 23
Model Hierarchy 24
Renaming Objects 25
ADAMS/View Interface 26
Simple Simulations 27
Saving Your Work 28
Getting Help 29
Workshop 2—ADAMS/View Interface Overview 30