Service Repair Manual
Models
M317D2 Wheeled Excavator
Shutdown SIS
Previous Screen
Product: WHEELED EXCAVATOR
Model: M317D2 WHEELED EXCAVATOR CH5
Configuration: M317 D2 Wheeled Excavator CH500001-UP (MACHINE) POWERED BY C4.4 Engine
Disassembly and Assembly
M315D, M315D Series 2, M315D2, M317D Series 2 and M317D2 Wheeled Excavators
Machine Systems
Media Number -KENR6028-05
Publication Date -01/07/2015
Date Updated -08/07/2015
i02811484
Swing Gear and Bearing - Remove
SMCS - 7063-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
138-7574
Link Bracket
3
Start By:
a. Separate the upper frame from the undercarriage. Refer to Disassembly and Assembly,
"Upper Frame and Undercarriage Frame - Seperate".
Illustration 1
g01118836
1/2(W)
w
2020/5/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
1. Attach Tooling (A) and a suitable lifting device to gear and bearing (1). The weight of gear
and bearing (1) is approximately 231 kg (510 lb).
Illustration 2
g01118837
2. Remove bolts (3) and spacers (2). Remove gear and bearing (1) from the machine.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon May 11 08:55:49 UTC+0800 2020
2/2(W)
w
2020/5/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
Shutdown SIS
Previous Screen
Product: WHEELED EXCAVATOR
Model: M317D2 WHEELED EXCAVATOR CH5
Configuration: M317 D2 Wheeled Excavator CH500001-UP (MACHINE) POWERED BY C4.4 Engine
Disassembly and Assembly
M315D, M315D Series 2, M315D2, M317D Series 2 and M317D2 Wheeled Excavators
Machine Systems
Media Number -KENR6028-05
Publication Date -01/07/2015
Date Updated -08/07/2015
i04640773
Swing Gear and Bearing - Install
SMCS - 7063-012
Installation Procedure
Table 1
Required Tools
Tool
Part Number
Part Description
Qty
A
138-7574
Link Bracket
3
B
8C-8422
Sealant
2
1/2(W)
w
2020/5/11
https://127.0.0.1/sisweb/sisweb/techdoc/tec