Service Repair Manual
Models
EL200B EXCAVATOR
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: EL200B EXCAVATOR 7DF
Configuration: E200B, EL200B TRACK-TYPE EXCAVATORS 7DF00001-UP (MACHINE) POWERED BY 3116 ENGINE
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18
Publication Date -01/05/2009
Date Updated -27/05/2009
i01929340
Engine Oil Pump - Remove
SMCS - 1304-011
Removal Procedure
Start By:
a. Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove
and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
1/2
E200B, EL200B TRACK-TYPE EXCAVATORS 7DF00001-UP (MACHINE) POWE...
2019/9/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Dispose of all fluids according to local regulations and mandates.
Note: For information on the reusability of the engine oil pump, refer to Guideline For Reusable
Parts And Salvage Operations, SEBF8167, "Reconditioning Procedures 3114 and 3116 Engines".
Illustration 1
g00894501
1. Remove bolts (1) and bolt (2).
2. Remove engine oil pump (3).
3. Remove the O-ring seal that is located between the cylinder block and the outlet elbow.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Sep 13 22:08:32 UTC+0800 2019
2/2
E200B, EL200B TRACK-TYPE EXCAVATORS 7DF00001-UP (MACHINE) POWE...