CEX, EC55C [GB]
The following illustrations and descriptions show the product plates on the machine. When ordering spare parts or for short
enquiries by phone and in correspondence you should always specify model designations and product identification
Product Identification plate (PIN)
The product plate contains name and address of manufacturer, model/type designation and 17 digit PIN number.
Supplementary PIN plate (EU countries only)
Example of 17 digit PIN number on PIN plate
World Manufacturing Code
The supplementary plate contains information about machine mass in kg, engine net power in Kw, manufacturing year,
machine serial number and a CE-mark.
The machine mass in kg on the supplementary PIN plate is based on:
cab or canopy
most used track type
most usual bucket (without load)
full fuel tank
For safety reasons, 103 % of the machine mass will be shown on the supplementary PIN plate.
Cab identification plate
The plate contains information about product number, machine model, cab serial number, ROPS/TOPS certificate number,
max. machine mass and international standard.
Engine identification plate
The engine identification plate contains information about manufacturer, designation and engine serial number.
CEX, EC55C [GB]
Position of components
A Fixed type (dozer blade)
B Angle type (dozer blade)
C Boom slewing type
D Boom fixed type
17 Bottom roller
2 Boom cylinder
18 Top roller
3 Travel lever (pedal)
19 Track tension adjustment position
4 Rear mirror (right)
5 Fuel tank
6 Hydraulic tank
22 Dozer blade
7 Working lights