Service Repair Manual
M317D2 Wheeled Excavator
Product: WHEELED EXCAVATOR
Model: M317D2 WHEELED EXCAVATOR CA6
Configuration: M317D2 Wheeled Excavator CA600001-UP (MACHINE) POWERED BY C4.4 Engine
Disassembly and Assembly
M315D, M315D Series 2, M315D2, M317D Series 2 and M317D2 Wheeled Excavators
Media Number -KENR6028-05
Publication Date -01/07/2015
Date Updated -08/07/2015
Main Hydraulic Pump - Disassemble
SMCS - 5070-015
Tool Part Number
Retaining Ring Pliers
Slide Hammer Puller Gp
a. Remove the main hydraulic pump. Refer to Disassembly and Assembly, "Main Hydraulic
Pump and Pump Drive Coupling - Remove".
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Dispose of all fluids according to local regulations and mandates.
Note: Note the location and orientation of the components for assembly purposes.
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Remove bolts (3) and valv