Quick Steps - HP Deskjet 2622 Setup
To set up your 123.hp.com/dj2622 printer and install it on your Windows or Mac device,
follow the detailed step-by-step procedures given below.
Place the printer package on a table or in a wide surface area where you can
perform the unboxing operation.
Get a knife or scissors to remove the outer packing material.
Open the top opening of the package and check if the box contains all the
components related to the printer.
In the box, you can find components such as HP Deskjet 2622 printer, set of ink
cartridges, USB cable, power cord, installation CD, warranty card, and the user
If any component is missing inside the printer package, then contact the
manufacturer for support.
Take all the components from the package and keep it aside.
Hold the handle of the printer cover and gently pull it out of the package.
Take the HP Deskjet 2622 printer out its cover and place it in a table.
You can find many protective tapes at the edges and joins of the printer, and
make sure remove it to unpack the printer.
Check if you have removed all the packing materials from the printer.
Now, get the power cable/cord for connection.
Link one side of the power cord to the wall outlet and the other end to your HP
Deskjet 2622 printer.
Switch the Power button to turn on the 123.hp.com/setup 2622 printer.
Now the printer goes to the warm-up process. Wait for it to complete.
Once the 123.hp.com/dj2622 printer becomes idle, you are prompted to set the
time, date, region/country, and language for HP Deskjet 2622 setup.
Click the OK button after setting the basic preferences.
Now the basic printer setup is done.
Open the input tray and fill the tray by a stack of white or A4 paper.
Close the opened input tray. Open the ink cartridge door.
Unpack the ink cartridge, remove the protective tape from it, and insert it into the
correct slot in the printer.
Now on your Windows or Mac system, install the 123.hp.com/setup 2622 printer