Material Safety Data Sheet
WHMIS (Pictograms)
Protective Clothing
Product Name
Synonym
Code
CPL GREENLUBE EP0 GREASE
Not available
650-761, CPLGL
Central line lubrication system on trucks.
Section 1. Chemical Product and Company Identification
In case of
Emergency
Petro-Canada: 403-296-3000
Canutec Transportation:
613-996-6666
P o i s o n C o n t r o l C e n t r e :
Cons u l t
l oc a l t e l ephone
d i rec t o ry f o r em ergenc y
number(s).
PETRO-CANADA
P.O. Box 2844
Calgary, Alberta
T2P 3E3
WHMIS (Classification)
Not controlled
TDG (pictograms)
DSL
See Section 15
See Section 15
TSCA
Manufacturer
Material Uses
Section 2. Composition and Information on Ingredients
Name
CAS #
Exposure Limits (ACGIH)
% (W/W) TLV-TWA(8 h)
STEL
CEILING
Mixture of severely hydrotreated and hydrocracked, and/or
solvent-refined base oil (petroleum) and other proprietary,
non-hazardous additives.
Mixture
100
5 mg/m³ (oil
mist)
10 mg/m³ (oil
mist)
Not established
Section 3. Hazards Identification.
Non irritating to slight transient irritation to skin and eyes, but no permanent damage. Relatively non-toxic via
ingestion. This product has a low vapour pressure and is not expected to present an inhalation exposure at ambient
conditions. Upon heating to high temperatures, or mechanical actions which may produce vapours or mists,
inhalation of product may cause irritation of the breathing passages. For more information, refer to Section 11.
Potential Health
Effects
DO NOT induce vomiting because of danger of aspirating liquid into lungs. Seek medical attention.
Eye Contact
Skin Contact
Inhalation
Ingestion
IMMEDIATELY flush eyes with running water for at least 15 minutes, keeping eyelids open. Seek medical attention.
Remove contaminated clothing - launder before reuse. Wash gently and thoroughly the contaminated skin with
running water and non-abrasive soap. High pressure grease gun is capable of injecting grease through the skin.
Grease gun injuries require immediate physician assessment. Seek medical attention.
Evacuate the victim to a safe