Instructor Notes:
CATIA V5 Fundamentals - Lesson 5: Dress-up Features
Copyright DASSAULT SYSTEMES
5-1
Copyright DASSAULT SYSTEMES
Lesson 5: Dress-up Features
In this lesson, you will learn how to place dress-up features on parts.
Case Study: Casing
Design Intent
Stages in the Process
Apply a Draft
Create a Stiffener
Create Threads and Taps
Edit Features
Duration: Approximately 0.5 day
Lesson content:
Lesson Content
Student guide: Lesson 5: Dress-up Features
Introduce the lesson. Present the lesson objectives and topics.
The document is for study only,if any tort to your rights,Please inform us,we will delete it
www.cadfamily.com
Contact:cadserv21@hotmail.com
Instructor Notes:
CATIA V5 Fundamentals - Lesson 5: Dress-up Features
Copyright DASSAULT SYSTEMES
5-2
Copyright DASSAULT SYSTEMES
Case Study: Dress-up Features
The case study for this lesson is the Casing used in the Drill Press assembly and shown
below. The focus of this case study is the creation of the part incorporating the design intent
requirements.
Case Study: Dress-up Features
Student Guide: Lesson 5- Case Study: Dress-up Features
Introduce the case study for this lesson.
Locate where the casing is in the main assembly.
Consider opening the Drill Press assembly in CATIA and showing the location of casing.
The document is for study only,if any tort to your rights,Please inform us,we will delete it
www.cadfamily.com
Contact:cadserv21@hotmail.com
Instructor Notes:
CATIA V5 Fundamentals - Lesson 5: Dress-up Features
Copyright DASSAULT SYSTEMES
5-3
Copyright DASSAULT SYSTEMES
Design Intent
The inner ribs should be created using
stiffener features.
The casing should contain a 4 degree draft.
The casing should have taps defined for all
holes.
The casing must meet the following design
intent requirements:
Case Study: Dress-up Features
Student Guide: Lesson 5- Design Intent
Identify the design intent for this model.
Stiffener features provide the most efficient method of creating this geometry.
T