Section 1 — Chemical Product and Company Identification
Section 2 — Composition, Information on Ingredients
Section 3 — Hazards Identification
Call a physician, seek medical attention for further treatment, observation and support after first aid.
Inhalation: Remove to fresh air at once. If breathing has stopped give artificial respiration immediately.
Eye: Immediately flush with fresh water for 15 minutes.
External: Wash continuously with fresh water for 15 minutes.
Internal: Rinse out mouth, give 1 to 2 cups of water or milk, induce vomiting. Call a physician or poison control at once.
Section 4 — First Aid Measures
Section 7 — Handling and Storage
Avoid contact with eyes, skin and clothing. Wear chemical splash goggles, chemical-resistant gloves and chemical-resistant apron.
Use ventilation to keep airborne concentrations below exposure limits. Always wear a NIOSH-approved respirator with proper
cartridges or a positive pressure, air-supplied respirator when handling this material in emergency situations (spill or fire).
Exposure guidelines: TWA 0.1 mg/m3 (OSHA, ACGIH)
Silvery or gray lustrous metal or powder.
Section 5 — Fire Fighting Measures
Non-flammable, non-combustible solid.
When heated or in contact with acid, emits toxic fumes of Stibine (SbH3).
Dust or powder is a fire or moderate explosion risk when exposed to heat or flame.
Firefighting Instructions: Use graphite powder, sand or dolomite or Class D fire extinguishing material.
Firefighters should wear PPE and SCBA with full facepiece operated in positive pressure mode.
Section 6 — Accidental Release Measures
Restrict unprotected personnel from area. Sweep up, place in sealed bag or container and dispose. Ventilate area and wash spill site
after material pickup is complete. See Sections 8 and 13 for further information.
Section 8 — Exposure Controls , Personal Protection
Flinn Suggested Chemical Storage Pattern: Inorganic #1. Store with metals and metal hydrides.
Use and dispense in a hood.