MATERIAL SAFETY DATA SHEET
Trustor Coatings, 401 North 72 nd Ave., Wausau, WI 54401
24 Hour Emergency Telephone: (715) 849-8080
SECTION 1. PRODUCT IDENTIFICATION
PRODUCT NAME: 6512 CERAMIC ARMOR ( WATER BORN FORMULA ONE SYSTEM )
CHEMICAL FAMILY: MIXTURE OF PU AND ACRYLIC DISPERSIONS (KEEP FROM FREEZING)
SECTION 2. HAZARDOUS INGREDIENTS AND EXPOSURE LIMITS
Substances presenting a health hazard within the meaning of the Dangerous Substances Directive 67/548/EEC
0.025 lb./Gal 20/21/22-37
0.327 lb./Gal 36/38 S 41
0.565 lb./Gal. none
0.272 lb./Gal. none
(See full text of R phrases under chapter 16)
SECTION 3. HAZARDS IDENTIFICATION
The Product is not classified as dangerous according to the CHIP Regulations. (also refer to Section 11.)
SECTION 4. FIRST AID MEASURES
General: In all cases of doubt, or when symptoms persist, seek medical attention. Never give anything by
mouth to an unconscious person.
Inhalation: Remove to fresh air, keep patient warm and at rest. If breathing is irregular or stopped,
administer artificial respiration. Give nothing by mouth. If unconscious place in recovery position and seek
Eye Contact: Contact lenses should be removed.
Irrigate copiously with clean fresh water for at least 10 minutes, holding the eyelids apart and then seek
Skin Contact: Remove contaminated clothing. Wash skin thoroughly with soap and water or use recognized
skin cleanser. DO NOT use solvents or thinners.
Ingestion: If accidentally swallowed obtain immediate medical attention. Keep at rest. Do NOT induce
SECTION 5. FIRE – FIGHTING MEASURES
Recommended: alcohol resistant foam, CO2, powders, water spray.
Not to be used: Water jet.
Recommendations: Due to the organ