English
570 575XP
Workshop manual
CONTENTS
Introduction .................................................. 3
Safety regulations ....................................... 4
Symbols ....................................................... 5
Technical data .............................................. 6
Service tools ................................................ 8
Service data ............................................... 10
Safety equipment....................................... 12
Starter ......................................................... 18
Electrical system ....................................... 20
Centrifugal clutch ...................................... 26
Lubrication system ................................... 28
Carburettor ................................................. 30
Tank unit ..................................................... 40
Anti-vibration system ................................ 42
Piston and cylinder ................................... 43
Crankcase and crankshaft ........................ 49
INTRODUCTION
English – 3
General
This Workshop Manual provides a comprehensive
description of how to trouble shoot, repair and test the
chainsaw. A description of different safety measures that
should be taken during repair work is also given.
Safety
Note! The section dealing with safety should be read
and understood by all who carry out repair and service
work on the chainsaw.
Warning symbols can be found in this Workshop Manual
and on the chainsaw. See page 3. A new warning symbol
must be applied as soon as possible if a warning symbol on
the chainsaw has been damaged or is missing to ensure
the greatest possible safety when using the chainsaw.
Tools
Special tools must be used during specific steps. All service
tools are listed in the Workshop Manual. Usage is evident
from respective sections.
Always use Husqvarna original parts:
• Spare parts
• Service tools
• Accessories
Target Group
When producing this Workshop Manual the assumption
has been made that personnel who use it ha