Service Repair Manual
Models
950B 950E WHEEL LOADER
Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 950B WHEEL LOADER 63R
Configuration: 950E WHEEL LOADER 63R06054-UP (MACHINE) POWERED BY 3304 ENGINE
Disassembly and Assembly
950B WHEEL LOADER POWER TRAIN
Media Number -SENR2258-01
Publication Date -01/05/1987
Date Updated -15/09/2004
SENR22580028
Transfer Gears
SMCS - 3159-015; 3159-016
Disassemble Transfer Gears
Start By:
a. separation of transmission from transfer gears (see Disassemble Transmission).
1. Fasten a hoist and turn the transfer gears over. Put the transfer gears on blocks with the back of
the case up as shown. The weight of the unit is approximately 231 kg (510 lb.).
1/14
950E WHEEL LOADER 63R06054-UP (MACHINE) POWERED BY 3304 ENGINE...
2020/4/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
2. Remove the bolt and plate (1) from the back of the bearing cage.
3. Remove the nuts, cover (2) and the gasket from the back of the bearing cage.
4. Remove bolts (3) that hold bearing cage (4) to the case.
5. Use two 3/8" - 16 NC forcing screws (5) to loosen bearing cage (4) and the O-ring seal from the
case. Remove bearing cage (4) and the shims. Keep the shims together for assembly purposes.
6. Remove O-ring seal (7) and bearing cup (6) from bearing cage (4).
7. Fasten a hoist and remove gear (8) and the bearing cones from the case. The weight of the unit
is 23 kg (50 lb.).
2/14
950E WHEEL LOADER 63R06054-UP (MACHINE) POWERED BY 3304 ENGINE...
2020/4/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Use tooling (A) to remove bearing cones (9) from each side of the gear.
9. Remove bearing cup (10) from the case.
10. Remove bolt (11), retainer (13), the O-ring seal and yoke (12) from the output shaft.
11. Remove bolts (15) that hold cage (14) to the case.
3/14
950E WHEEL LOADER 63R06054-UP (MACHINE) POWERED BY 3304 ENGINE...
2020/4/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...