Guide On UV Light Installation In HVAC
Do you want to understand how to install a UV light within your HVAC system? You’ve
come to the right location because UV-C light sterilizes the air circulation through an
HVAC unit. This article will also guide you on the UV light Installation process. UV
bulbs in HVAC systems emit UV light, which destroys mold, mildew, and airborne viruses.
It is a type of electromagnetic radiation that occurs at the lower range of the light
wavelength spectrum. Sun also emits UV light, accounting for around 10% of the Sun’s
Short-wave UV radiation sterilizes the regions it comes into touch with, one of its
advantages. You can also reach out to air duct sanitizing Dunwoody for more
information. This article will also guide you on the UV light Installation process.
Location of UV Light
The first phase UV light installation is to figure out where it should go on your furnace or
air handler. If the germicidal UV light is put incorrectly, you will considerably reduce its
performance in preventing mold or mildew growth. Typically, you should install the A/C
ultraviolet light treatment system so that the evaporator coil receives the most light. The
evaporator coil is frequently the origin of HVAC pollutants.
Biofilms, which are microorganisms that cling together on a surface, can build on the
evaporator coil. The evaporator, often known as the A-coil, is in the air handler section
where the refrigerant goes via copper or aluminum tubing. It usually takes the shape of an
“A,” and it has the highest dust and mold growth.
Unless you already have mold in your HVAC and there is a certain corner or region of the
air handler that is vulnerable to mold, you should place the UV lamp so that it shines the
brightest on the troublesome mold location. It’s pointless to try other spots if you already
know which part of your air conditioner gets the most mold.
It’s a good idea to open the furnace’s