Service Repair Manual
Models
326F, 326F L and 326F LN
Excavator
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 326F EXCAVATOR HCA
Configuration: 326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
326F, 329F and 330F Excavators Machine Systems
Media Number -UENR3313-07
Publication Date -01/09/2015
Date Updated -12/09/2018
i05435999
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number
Part Description
Qty
A
1U-7506
Adapter
1
8T-4244
Nut
6
8T-4223
Hard Washer
6
-
M12 x 1.75 X 250 mm (10 inch) Threaded Rod
1
C
3E-3882
Eyebolt
1
D
1P-1859
Retaining Ring Pliers
1
E
1P-0510
Driver Gp
1
9S-9152
Bearing Puller Gp
1
F
1P-1861
Retaining Ring Pliers
1
G
-
Loctite 242
-
1/10
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1
g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2
g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3
g00887729
3. Install backup ring (32) and seal (31).
2/10
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 4
g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5
g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) in order to install
lip seal (28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) in order to install retaining ring (27).
Illustration 6
g02107975
7. Rotate the housing.
3/10
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techd