Premier Lubricants (S) Pte Ltd
24 Jurong Port Road,
#01-01 Office Block,
CWT Distripark, Singapore 619097
Tel.: +65 262 5561
Fax: +65 262 5560
Castrol Ilocut 155
This product is normally applied to less exacting machining operations, whilst
retaining its serviceability for the cutting of both ferrous and non-ferrous stocks,
thanks to the non-strain form in which the sulphur is combined. In this way,
Castrol Ilocut 155 gives excellent results on multi-spindle automatics, on
capstan and turret lathes.
There are opportunities for oil rationalisation when using this grade, for since
Castrol Ilocut 155 is equally satisfactory when cutting cuprous metals or
steels. Its introduction into the machine shop may well eliminate the necessity
to carry stocks of two or more different neat oils to meet the production
requirements of a particular section.
§ Consistently high surface finish and dimensional accuracy
§ Versatile product which can be used in many applications and materials.
§ Increases tool life and reduce change frequency.
Castrol Ilocut 155 is recommended for multi-spindle automatics, capstan and
turret lathes cutting medium tensile steels or when alternating with non-ferrous
Density @ 15°C
Kinematic Viscosity, cSt
Closed Flash Point, °C
Sulphur % wt
Chlorine % wt
Fat % wt
Copper Corrosion (100°C @ 3 Hrs)
( A : <1 % B : 1 - 3 % C : >3 - 9 % D : >9 -20 % E : >20 % )
All reasonable care has been taken to ensure that the information contained in this publication is accurate as
of the date of printing. However, such information may, nevertheless, be affected by changes in the blend
formulation occurring subsequen