Service Repair Manual
Caterpillar Cat 232 SKID
Product: SKID STEER LOADER
Model: 232 SKID STEER LOADER CAB
Configuration: 216 226 232 242 Skid Steer Loader CAB00001-UP (MACHINE) POWERED BY 3024C, 3034 Engine
Disassembly and Assembly
216, 226, 232 and 242
Skid Steer Loaders Machine Systems
Media Number -RENR4838-02
Publication Date -01/11/2009
Date Updated -04/11/2009
Control Valve (Work Tool) - Remove
SMCS - 5051-011
Face Seal Plug (9/16 - 18 THD)
Cap As (9/16 - 18 THD)
Face Seal Plug (11/16 - 16 THD)
Cap As (11/16 - 16 THD)
Face Seal Plug (1 3/16 - 12 THD)
Cap As (1 3/16 - 12 THD)
Cap (1 5/16)
A. Release the pressure in the hydraulic system. Refer to Disassembly and Assembly,
"Hydraulic System Pressure - Release".
Note: SERVICE DATA: TOOLING (A) WILL NOT BE IDENTIFIED IN
PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS
SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
216 226 232 242 Skid Steer Loader CAB00001-UP (MACHINE) POWERED BY 302...
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
Personal injury or death can result without releasing all of the
Release all the pressure from the hydraulic system before a