702-SERIES PRO FINISH LATEX ZONE MARKING PAINT
702-series Latex Zone Marking Paint combines the use of a 100% acrylic
polymer with quality pigments to form tough, durable films with excellent
adhesion and wear resistance. This water based product eliminates all of the fire
and lead hazards present in solvent based marking paints. Being water based
also eliminates bleed-through into the stripe when applying over tar or asphalt
USES: Marking all types of street and floor (concrete) surfaces. Ideal for marking parking
zones, lanes and shipping docks.
SURFACE PREPARATION: A clean surface is required for best adhesion and durability.
Remove dust by brushing off surface with a stiff brush or by scrubbing with water. Remove oil
or grease spots with naphtha or turpentine.
APPLICATION: Brush, roller or spray. Do not apply when temperature is less than 50ºF.
DRY TIME: 30 minutes dust-free; non-tracking in one hour. Will vary with temperature and
702-00 White - Titanium dioxide and non-
702-13 Yellow - Titanium dioxide, hansa yellow R,
lithipone and non-hazardous silicates.
100% Acrylic polymers
702-00 - Water. VOC 35g/L; 0.29 lbs/gal.
702-13 - Water. VOC 34g/L; 0.28 lbs/gal.
702-00 - 49
703-13 - 52
702-00 - 35.6
702-13 - 37.3
200 sq.ft/gal=8 wet mils=2.9 dry mils
267 sq.ft/gal=6 wet mils=2.2 dry mils
400 sq.ft/gal=4 wet mils=1.5 dry mils
WEIGHT PER GALLON:
702-00 - 10.3 - 10.8 lbs.
702-13 - 10.5 - 11.0 lbs.
702-00 - 75-80 KU
702-13 - 85-90 KU
702-00 - Universal colorants
702-13 - Not recommended